SPEC NO: DSAF2130 REV NO: V.5A DATE: FEB/08/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101009206
Selection Guide
Notes:
1. ?/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25癈
Electrical / Optical Characteristics at TA=25癈
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No.
Dice
Lens Type
Iv (mcd) [2]
@ 10mA
iewing
Angle [1]
Min.
Typ.
2?/2
WP132XIT
High Efficiency Red (GaAsP/GaP)
Red Transparent
12
30
*10
*20
50?/SPAN>
Symbol
Parameter
Device
Typ.
Max.
Units
Test Conditions
籶eak
Peak Wavelength
High Efficiency Red
627
nm
IF=20mA
籇 [1]
Dominant Wavelength
High Efficiency Red
617
nm
IF=20mA
敾1/2
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
10
uA
VR = 5V
Parameter
High Efficiency Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
160
mA
Reverse Voltage
5
V
Operating/Storage Temperature
-40癈 To +85癈
Lead Solder Temperature [2]
260癈 For 3 Seconds
Lead Solder Temperature [3]
260癈 For 5 Seconds